cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

458
Views
5
Helpful
4
Replies
carl.townshend
Beginner

Speed up call divert in CUCM

Hi All

We have a setup where we divert incoming numbers back out of our ISDN to an external switchboard.

Users are complaining saying it is taking too long for the number to ring the other side.

Is there any way of speeding this forwarding process up?

Currently it is a translation pattern, it has the urgent priority box set.

 

cheers

4 REPLIES 4
Nithin Eluvathingal
VIP Advisor

 Can you please provide bit more information regarding  your setup(gateway type, call control platform.. etc)  and  call flow.

 

 



Response Signature


Hi, it is cucm version 11.5

 

Call comes in via H323 Cisco Gateway, this is then sent to CUCM, CUCM then has translation pattern to send back to same H323 Gateway and then Gateway sends out to PSTN dial peer

 

cheers

Whats pattern you use for Rp and Dial-peers, is it "T". try reducing interdict timeout and see if it makes any difference.

 

How to modify, have a look on below blog. 

 

http://www.i-1.nl/blog/?p=153

 

 

 

 



Response Signature


TONY SMITH
VIP Rising star

Have you checked that the delay is actually within your system?  Have a look at the gateway debugs for a diverting call ("debug isdn g931") and look at the time between incoming Setup for the original call, and outgoing Setup for the diverted call.

Content for Community-Ad