05-23-2011 10:56 PM - edited 03-16-2019 05:06 AM
- Do I need a license SRST phone device apart from the SRST gateway license to ensure access to the PSTN on an IP phone that has its Call Manager with a failure, but the IP phone in question has its "UCL Enhanced license" enabled in CUCM Business Edition 5000?
- Is it not correct that the UCL licensing eliminate the need to purchase two licenses, gateway and phone device?
- Since the investment was higher in the Call Manager BE5K, Do I have to pay license fees on phone CME to use SRST gateway license?
Regards.
05-24-2011 01:50 AM
Hello,
Yes , the gateway license is different , there is a partnumber specially for the CME-SRST gateway that has by default some license , you have to upgrade the license number on the gateway to the number of ip phones that will register with the gateway when the WAN fails.
Amer
05-24-2011 05:33 AM
Hi Luis,
Just to add a note to the good tips from Amer;
You will only need a License like the one below. No new/secondary phone SRST
Licenses are required
FL-CME-SRST-25
Cisco CME or SRST - 25 seat Paper Feature License
ISR 29xx, 39xx
Cheers!
Rob
05-24-2011 06:52 AM
Thanks Rob and Amer for your help,
but anyone could tell me where in cisco pages I could find this statement? "that with SRST we dont need purchase phone device license in a CUCMBE based solution"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide