05-13-2016 01:55 AM - edited 03-17-2019 06:53 AM
Hello,
has anyone some good documentation (with examples) about encryption of conversation between phone, cucm and VGW (H323)?
I only found documentation about MGCP for signaling.
EDIT:
The phone encryption is clear. But the leg between CUCM and VGW.
Thanks
Christian
Solved! Go to Solution.
05-13-2016 02:14 AM
Hi Christian,
Please check the following section of the cucm security guide
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/security/9_1_1/secugd/CUCM_BK_C0395F44_00_cucm-security-guide-91/CUCM_BK_C0395F44_00_cucm-security-guide-91_chapter_011000.html
HTH
Manish
05-13-2016 02:43 AM
Hi Christian,
You may refer the following
http://www.cisco.com/c/en/us/td/docs/ios/12_4t/12_4t11/htsecure.html
HTH
Manish
05-13-2016 02:14 AM
Hi Christian,
Please check the following section of the cucm security guide
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/security/9_1_1/secugd/CUCM_BK_C0395F44_00_cucm-security-guide-91/CUCM_BK_C0395F44_00_cucm-security-guide-91_chapter_011000.html
HTH
Manish
05-13-2016 02:38 AM
OK, as i understand correct
1. I have to enable SRTP on CUCM.
2. I have to configure IP SEC on CUCM
3. Configure IP SEC on H323 VGW
(Is there an example Config for H323 VGW with IPSEC and SRTP?)
05-13-2016 02:43 AM
Hi Christian,
You may refer the following
http://www.cisco.com/c/en/us/td/docs/ios/12_4t/12_4t11/htsecure.html
HTH
Manish
05-13-2016 02:45 AM
That is what i'm looking for. Thanks a lot.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide