cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
233
Views
0
Helpful
2
Replies

Standalone upgrading phone firmware

billmatthews
Beginner
Beginner

I need to be able to upgrade/downgrade my phone firmware, without any CUCM.  I've setup DCHP with option 150, and a tftp server.  If I just place the contents of the Cisco firmware .zip file in my tftp directory, that should be all I need right? It'll just request the termxx.default.loads, and upgrade/downgrade as necessary?  Just making sure I don't need an xml file.

Thanks

2 Accepted Solutions

Accepted Solutions

Jaime Valencia
Hall of Fame Cisco Employee Hall of Fame Cisco Employee
Hall of Fame Cisco Employee

The cnf or cnf.xml file is the one that tells the phone which FW to get, so, you do need the config files.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

View solution in original post

Hi Bill,

You need the XMLdefault.cnf file since u need to mention the desired firmware name in this file.

U can refer the link

https://supportforums.cisco.com/docs/DOC-23730

regds,

aman

View solution in original post

2 Replies 2

Jaime Valencia
Hall of Fame Cisco Employee Hall of Fame Cisco Employee
Hall of Fame Cisco Employee

The cnf or cnf.xml file is the one that tells the phone which FW to get, so, you do need the config files.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Hi Bill,

You need the XMLdefault.cnf file since u need to mention the desired firmware name in this file.

U can refer the link

https://supportforums.cisco.com/docs/DOC-23730

regds,

aman

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: