05-07-2010 03:51 AM - edited 03-15-2019 10:39 PM
Dear all,
I have my cisco cme version of IOS is 12.4(24)T
i have three fxo port and i have connected them to ip phone with connection plar opx 300
my ip phone has two DN 301 and 300
i configured voice-port with connection plar opx 300 and the other voice-port with connection plar 301
when some one calls to one of my line number of FXO port , the ip phone will ring and shows the caller id
but the problem is when the first line is busy and some one call to the other port of FXO the ip phone will ring but no caller id!!!
it shows external and unknown number.
the caller-id enable is under both voice-ports
please help
05-07-2010 03:56 AM
05-07-2010 04:07 AM
Hi,
Its a better idea to check with your provider,how they send caller-id information ..
Check wheter they send it on alerting stage or connected stage. then i will solve it.
Thanks
Vikrant
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide