07-15-2021 06:25 AM
right now we use Cisco voice gateway and voice gatekeeper to manage and distribute IP calls via H323 protocol,
now we have one strange problems as below:
B is our IT center and gatekeeper is there.
A is our region
C is other region.
we call C and it works, C call us does not work. we call B, B can hear the ring, but when they pickup the phone, they can hear nother and from myside I cannot feel B already picked up. once B put down the phone, it's still ring untill I hang off the phone.
07-15-2021 06:34 AM
Hi Frank,
Have you checked whether you have all required dial-peers and also the zone registration at the gatekeeper.
HTH
Rajan
Please rate all useful posts by clicking the star below and mark solutions as accepted wherever applicable
07-15-2021 07:30 AM
Not yet, because gatekeeper is in responsible by the other department, I have to ask.
so from your opions, from our side we do not need to do more configuration, correct?
Thanks.
07-15-2021 07:31 AM
is there a firewall in between, What codec you use between these location ?
07-15-2021 07:34 AM
I do not think we have a firewall, because we can call to C and via B, B is our center and gatekeeper location,
and we use this:
voice-class codec 1
07-15-2021 08:18 AM
Could be Codec negotiation issue, or if there is a firewall it could be due to SIP/SCCP inspection. I had similar issue where there was a firewall.
07-15-2021 08:21 AM
so I have to ask the configuration on gatekeeper to check the codec is the same and zone registration is complete, correct?
07-15-2021 09:23 AM
You need to Check Codec used and also verify if there is a firewall in between.
07-19-2021 12:03 AM
we found the reason, we forgot to configure the dial-peer for the inbound stream from the other region to our gateway. and also the number which come from the other region, the gate keeper has not delete zone prefix, so we must translate the number in the CUCM.
Thanks a lot.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide