"Offers the UC Features found in IPVoice IOS image on ISR 1800,2800 and 3800 e.g. TDM/PSTN Gateway, Video Gateway[H320/324],Voice Conferencing, Codec Transcoding, RSVP Agent (voice), FAX T.37/38, CAC/QOS, Hoot-n-Holler etc."
But, I haven't found the list for CollabProSuite.
Both packages can be used for CME/SRST: "For the Cisco Unified CME license, the UCK9 technology package must be available if the Collaboration Professional Suite package is not installed. UCK9 is a prerequisite for Cisco Unified CME Release 11."
To me it is not clear in which cases I need to order CollabProSuite technology-package. Please clarify the situation, thank you in advance.
UCK9 is the bundle that you will need to apply on the router so that it can act as a Voice router and allow you to use it for voice purposes such as CME and SRST. On top of this, you will also require Cisco Unified CME Permanent License or Collaboration Professional Suite License. More details below:
Thank you for your reply. It is clear about UCK9, but could you tell me something about Collaboration Professional Suite License (not about permanent or RTU). What is the purpose? What is the difference from UCK9?
Thank you in advance.
Good afternoon,Strange occurrence happening. We two different agents getting connected to the same caller/customer. We have checked the ext in CUCM, they are different. We have checked the ICM configs, different. We have listened to the call r...
Is there a way in UCCE with using an admin script maybe using the email application in Call Studio to send out an email? I know in UCCX you can send out an email if the script were to fail but is there a way to do it in UCCE? Any help would be great!
Fun lab with Packet Tracer and running Cisco CME with 3 ip phones, 3 laptops, 1 switch, and 1 router. Fun lab with repetition. You will be able to test your phones and laptop for connectivity etc. Solution;see attached CME Packet Tracer L...