Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Dear All, 7916 Expansion module installed on 7975, but it is not working. I have gone through the below document but it did not help. Please help me with configuration. http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cuipph/7916/english/16enug...
Hello. I'm trying to configure our phones to be blocked until a user login to it. I've understand (is it right?) that I must use extension mobility. I've added the profile and subscribed the phone to the ext-mob service, and using the phone "services...
Hello all , May be the title has a lot of confusion but I will explain briefly : We have BE6K server configured and a Voice gateway with 2 FXO one of them configured and connect to Teleco. the second will be connected to the Fax machine through ...
Hi, I have CUCM 9.1.1. I have to add CISCO 8865 IP phones with CUCM 9.1.1. But I came to know 8865 have support in CUCM 9.1.2 not with CUCM 9.1.1. Can anyone help me to find proper device pack for my CUCM up gradation to 9.1.2 from 9.1.1. I just ...
Hi, After installing CUAC version 11.0.1.10-2 and setting the operator + using LDAP sync etc I have the following problem: No incoming calls appear in the All Queues window. Can see the calls in the Active Q window. Running on eval licensing until ...
Dear all, We have an Cisco systems 2800 series. The following "About the System" of "Cisco systems 2800 series": About the SystemCisco Unified CallManager Express OS Description Cisco Internetwork Operating System Cisco IOS (tm) C2801 Cisco IOS Soft...
Hi, I am in need of help with the following please. CUC active version: 10.5.2.13900-12 inactive partition has: UCSInstall_UCOS_11.0.1.22900-14.sgn.iso I get the following error when I attenpt to switch versions: 'Only one entry found in /grub/boo...
Hello All, Could you please any one advise, VIC2-2BRI-NT/TE will have capability to support DSUs (mean U interface Features) ? mean 1-Port HWIC-1B-U is designed to support U interface with single pair wire (RJ-48C connector) , but same line can b...
I'm trying to setup a hunt pilot using serveral analog lines from my vg224. When I use these DN numbers assoicated with the VG224 I get a busy signal. if I use any other DN number, such as an IP phone the Hunt pilot works correctly. Since it works...
Hi Team , I want a document for Cisco Compliance for licensing model I have seen some configurations at client site wherein using generic users they have mapped 100 phones ,which consumes 10 CUWL STD licenses ,instead of 100 Enhanced Licenses ...
Dear All, I have forgotten CUC OS administrator username and password. Could I get procedure to reset it. Thank you in advance.
Hi there, I have a few DX80 register with CUCM and setup for Extension Mobility When a user log's into the DX with his EM profile for the first time he gets asked to setup allot of things like webex, contacts etc. If he logs outs and logs back in o...
Hi buddies. We have a cisco router 2811 with a vwic-2MFT-E1/T1. one of the E1 port is connected to Panasonic "TDA200" and the other port is connected to PSTN. Some of our internal user is connected to Panasonic and others connected to our SIP server"...
We have selective call recording setup for all of our extensions. The recording is through media sense and it works well for a single call. When we transfer to another extension the recording does not continue. Is there an option to allow the re...
Hi guys, I have a working POE module of 48 ports (WS-X4248-RJ45V) on my C4503-E switch and I would like to use the module on my other switch C4507R. The switch recognizes the POE module but it does not power my poe devices such as IPhone even after I...
