Trunk 7936

[wfeng]

Is there any reason why you would want to trunk a 7936? If on the switch side, you are using the access vlan and voice vlan. Does trunking cause any issues?

[paolo bevilacqua]

Hello,

I do not see any reason to trunk a 7936, or any other model. As you indicated, the access+voice vlan is the proper way to configure the switch port.

Hope this helps, please rate post if it does!

[Rob Huffman · Accepted solution]

Hi Sar,

Paolo is correct here (as usual Paolo)! I have found that the 7935 and 7936 will not fire up if you configure the switchport in Trunk mode :(

Hope this helps!

Rob

[wfeng]

Thanks for your help!