uc500 & hardware conference (more than three people)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-22-2008 01:55 AM - edited 03-15-2019 11:26 AM
are the anyone?
who makes hardware conference with UC500
I am try yo configure UC500
taking th following error messages
Jun 22 09:42:25.703: sccp_process_swb_control_message: appl 8437CA68, soc_recv err 254, len -1, appl_type 3
Jun 22 09:42:35.711: sccp_process_swb_control_message: appl 8437CA68, soc_recv err 254, len -1, appl_type 3
Jun 22 09:42:43.791: sym_xapp_process_ccapi_events: minor is ZERO - should be non-zero for CCAPI event
Jun 22 09:42:45.719: sccp_process_swb_control_message: appl 8437CA68, soc_recv err 254, len -1, appl_type 3
Jun 22 09:42:55.727: sccp_process_swb_control_message: appl 8437CA68, soc_recv err 254, len -1, appl_type 3
Jun 22 09:43:05.735: sccp_process_swb_control_message: appl 8437CA68, soc_recv err 254, len -1, appl_type 3
Jun 22 09:43:15.743: sccp_process_swb_control_message: appl 8437CA68, soc_recv err 254, len -1, appl_type 3
- Labels:
-
Other IP Telephony

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-22-2008 02:01 AM
Which exact IOS are you using ?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-22-2008 10:09 AM
12.4(11)XW6

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-22-2008 10:55 AM
Can you upgrade to XW8 to eliminate chances this is caused by a bug already fixed ?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-23-2008 06:29 AM
12.4(11)XW7 is available for UC500
I cannot find 12.4(11)XW8
I try 12.4(11)XW7, problem continues.
thanks

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-23-2008 06:40 AM
Yes I can find 12.4(11)XW8, however since I cannot guarantee that is the problem, does the conferencing works beside the error message ? can you send config ?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-23-2008 06:51 AM
here is my config;
!
stcapp ccm-group 1
stcapp
!
stcapp feature access-code
!
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
sip
no update-callerid
!
!
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
!
!
!
!
voice-card 0
dspfarm
dsp services dspfarm
!
!
!
!
!
interface Loopback0
ip address 10.1.10.2 255.255.255.252
ip nat inside
ip virtual-reassembly
!
interface FastEthernet0/0
ip address dhcp
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
crypto map SDM_CMAP_1
!
interface Integrated-Service-Engine0/0
description cue is initialized with default IMAP group
ip unnumbered Loopback0
ip nat inside
ip virtual-reassembly
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
!
!
!
!
voice-port 0/0/0
timeouts ringing infinity
!
voice-port 0/0/1
timeouts ringing infinity
!
voice-port 0/0/2
timeouts ringing infinity
!
voice-port 0/0/3
timeouts ringing infinity
caller-id enable
!
!
!
sccp local Loopback0
sccp ccm 10.1.1.1 identifier 1
sccp
!
sccp ccm group 1
associate ccm 1 priority 1
associate profile 1 register mtp001e1314cf42
keepalive retries 5
!
dspfarm profile 1 conference
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 2
associate application SCCP
!
!
!
dial-peer voice 1 pots
preference 7
service stcapp
port 0/0/0
!
dial-peer voice 2 pots
service stcapp
port 0/0/1
!
dial-peer voice 3 pots
service stcapp
port 0/0/2
!
dial-peer voice 4 pots
service stcapp
port 0/0/3
!
!
!
telephony-service
sdspfarm units 4
sdspfarm tag 1 mtp001e1314cf42
conference hardware
!
!
ephone-template 1
conference admin
network-locale 1
user-locale 1
keep-conference
!
!
!
!
ephone-dn 5 dual-line
number 301
label 301
description 301
name 301
!
!
ephone-dn 6 dual-line
number 302
label 302
description 302
name 302
!
!
ephone-dn 7 dual-line
number 303
label 303
description 303
name 303
!
!
ephone-dn 8 dual-line
number 304
label 304
description 304
name 304
!
!
ephone-dn 10 dual-line
number 201
pickup-group 4
label 201
call-forward busy 600
call-forward noan 600 timeout 10
!
!
ephone-dn 11 dual-line
number 202
pickup-group 4
label 202
call-forward busy 600
call-forward noan 600 timeout 10
ephone 5
device-security-mode none
video
ephone-template 1
type 7975
button 1:10
!
ephone 6
device-security-mode none
video
ephone-template 1
type 7975
button 1:11
!

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-23-2008 06:54 AM
Hi, you're missing a large number of required commands for HW conferencing, please check the administrator guide again to see all the ones that are required.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-23-2008 07:02 AM
excuse me,
I have missed some
The following is true
The same config works on 2851 (3 PVDM)
But it cannot work UC500 (2 PVDM)
!
stcapp ccm-group 1
stcapp
!
stcapp feature access-code
!
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
sip
no update-callerid
!
!
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
!
!
!
!
voice-card 0
dspfarm
dsp services dspfarm
!
!
!
!
!
interface Loopback0
ip address 10.1.10.2 255.255.255.252
ip nat inside
ip virtual-reassembly
!
interface FastEthernet0/0
ip address dhcp
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
crypto map SDM_CMAP_1
!
interface Integrated-Service-Engine0/0
description cue is initialized with default IMAP group
ip unnumbered Loopback0
ip nat inside
ip virtual-reassembly
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
!
!
!
!
voice-port 0/0/0
timeouts ringing infinity
!
voice-port 0/0/1
timeouts ringing infinity
!
voice-port 0/0/2
timeouts ringing infinity
!
voice-port 0/0/3
timeouts ringing infinity
caller-id enable
!
!
!
sccp local Loopback0
sccp ccm 10.1.1.1 identifier 1
sccp
!
sccp ccm group 1
associate ccm 1 priority 1
associate profile 1 register mtp001e1314cf42
keepalive retries 5
!
dspfarm profile 1 conference
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 2
associate application SCCP
!
!
!
dial-peer voice 1 pots
preference 7
service stcapp
port 0/0/0
!
dial-peer voice 2 pots
service stcapp
port 0/0/1
!
dial-peer voice 3 pots
service stcapp
port 0/0/2
!
dial-peer voice 4 pots
service stcapp
port 0/0/3
!
!
!
telephony-service
sdspfarm units 4
sdspfarm tag 1 mtp001e1314cf42
conference hardware
!
!
ephone-template 1
conference admin
network-locale 1
user-locale 1
keep-conference
!
!
!
!
ephone-dn 5 dual-line
number 301
label 301
description 301
name 301
!
!
ephone-dn 6 dual-line
number 302
label 302
description 302
name 302
!
!
ephone-dn 7 dual-line
number 303
label 303
description 303
name 303
!
!
ephone-dn 8 dual-line
number 304
label 304
description 304
name 304
!
ephone-dn 30 dual-line
number 8889
name Conference
conference ad-hoc
no huntstop
!
!
ephone-dn 31 dual-line
number 8889
name Conference
conference ad-hoc
preference 1
no huntstop
!
!
ephone-dn 32 dual-line
number 8889
name Conference
conference ad-hoc
preference 2
no huntstop
!
!
ephone-dn 33 dual-line
number 8889
name Conference
conference ad-hoc
preference 3
!
!
ephone-dn 10 dual-line
number 201
pickup-group 4
label 201
call-forward busy 600
call-forward noan 600 timeout 10
!
!
ephone-dn 11 dual-line
number 202
pickup-group 4
label 202
call-forward busy 600
call-forward noan 600 timeout 10
ephone 5
device-security-mode none
video
ephone-template 1
type 7975
button 1:10
!
ephone 6
device-security-mode none
video
ephone-template 1
type 7975
button 1:11
!
