02-23-2012 01:08 PM - edited 03-16-2019 09:45 AM
Hi,
I have a problem with SIP phones on UC500.
UC500 has a SIP trunk and when I try to make a call using a sip phone that's not working.
If I use scpc phone everything is OK.
I tried to bind interface on voice service voip for sip, to setup outgoing proxy ,... but I was not succesfull.
I found similar issues on this forum but without solution:
https://supportforums.cisco.com/message/3082843#3082843
https://supportforums.cisco.com/message/3364734#3364734
Thanks,
O
02-23-2012 02:03 PM
Hi,
Are you running in to the Toll Fraud feature?
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080b3e123.shtml
Adam
02-23-2012 03:03 PM
Router is configured to accept incoming call setups from all sources ip adds :
voice service voip
ip address trusted list
ipv4 0.0.0.0 0.0.0.0
Thanks Adam...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide