cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
767
Views
0
Helpful
4
Replies

UC520 Registration to gatekeeper

casey1hunter
Level 1
Level 1

Has anyone tried to register a UC520 to Gatekeeper? I'm having trouble getting the UC520 to register. Below are may gateway and gatekeeper configs and the debug h225 asn1 from the gateway.

Gateway

voice service voip

qsig decode

allow-connections h323 to h323

allow-connections h323 to sip

allow-connections sip to h323

allow-connections sip to sip

supplementary-service h450.12

h323

h225 listen-port 1820

no call service stop

sip

bind control source-interface Vlan20

bind media source-interface Vlan20

registrar server expires max 600 min 60

!

interface Vlan20

description voice

ip address 172.21.2.1 255.255.255.0

h323-gateway voip interface

h323-gateway voip id ZONE-CME ipaddr 172.21.1.4 1719

h323-gateway voip h323-id GW-CME

h323-gateway voip tech-prefix 8

gateway

dial-peer voice 2100 voip

destination-pattern 7...

session target ras

Gatekeepter

gatekeeper

zone local Gatekeeper msi-uclab-local

zone subnet Gatekeeper 172.21.2.0/24 enable

zone prefix Gatekeeper 4... gw-priority 5 GW-CME

zone prefix Gatekeeper 7... gw-priority 5 gk-trunk_1

no shutdown

littlesalt2811(config)#do debu ras

H.323 RAS Messages debugging is on

littlesalt2811(config)#

littlesalt2811(config)#

littlesalt2811(config)#

littlesalt2811(config)#

Sep 29 12:18:49.971: RecvUDP_IPSockData successfully rcvd message of length 70 from 172.21.2.1:59522

Sep 29 12:18:49.975: GRQ (seq# 2212) rcvd

Sep 29 12:18:49.975: IPSOCK_RAS_sendto: msg length 12 from 172.21.1.4:1719 to 172.21.2.1: 59522

Sep 29 12:18:49.975: RASLib::RASSendGRJ: GRJ (seq# 2212) sent to 172.21.2.1

littlesaltUC520#show gateway

H.323 ITU-T Version: 4.0 H323 Stack Version: 0.1

H.323 service is up

Gateway GW-CME is not registered to any gatekeeper

Alias list (CLI configured)

H323-ID GW-CME

E164-ID 3001

Alias list (last RCF) is empty

littlesaltUC520#debug h225 asn1

H.225 ASN1 Messages debugging is on

littlesaltUC520#

littlesaltUC520#term mon

littlesaltUC520#

Sep 29 18:17:54.654: RAS OUTGOING PDU ::=

value RasMessage ::= gatekeeperRequest :

{

requestSeqNum 2215

protocolIdentifier { 0 0 8 2250 0 4 }

rasAddress ipAddress :

{

ip 'AC150201'H

port 59522

}

endpointType

{

vendor

{

vendor

{

t35CountryCode 181

t35Extension 0

manufacturerCode 18

}

}

gateway

{

protocol

{

voice :

{

supportedPrefixes

{

{

prefix dialedDigits : "8"

}

}

}

}

}

mc FALSE

undefinedNode FALSE

}

gatekeeperIdentifier {"ZONE-CME"}

endpointAlias

{

h323-ID : {"GW-CME"},

dialedDigits : "3001"

}

}

Sep 29 18:17:54.654: RAS OUTGOING ENCODE BUFFER::= 00A008A6060008914A000400AC150201E8822800B500001240013C0504010000B00380005A004F004E0045002D0043004D004502400500470057002D0043004D004501806334

Sep 29 18:17:54.654:

Sep 29 18:17:54.658: RAS INCOMING ENCODE BUFFER::= 080008A6060008914A000420

Sep 29 18:17:54.658:

Sep 29 18:17:54.658: RAS INCOMING PDU ::=

value RasMessage ::= gatekeeperReject :

{

requestSeqNum 2215

protocolIdentifier { 0 0 8 2250 0 4 }

rejectReason terminalExcluded : NULL

4 Replies 4

paolo bevilacqua
Hall of Fame
Hall of Fame

You should check on the GK why it rejects the GW.

Can you recommend what debug I should run. I'm doing a debug RAS but that isn't giving me enough to go off of.

Sorry, I am not familiar with GK debugs. Hope you can find something there.

Hi, you have a reason for reject(the last line of your debug)

rejectReason terminalExcluded : NULL

Try to watch here:

http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a008011221e.shtml#rr2

I found this cisco web-page very useful watching for debug commands(Voice Debug Lookup section): http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a0080207ec6.shtml

HTH