11-29-2012 07:25 PM - edited 03-16-2019 02:28 PM
Hi
I have installed CUCM Publisher on Cluster, then I want to install the CUCM Subscriber in Cluster, when Installling the Subscriber it says that unable to find the hostname of CUCM Publisher, ? i cant give the IP address of CUCM Publisher as the hostname !!!
DNS is currently disable in this environment, how can i provide the connectivity between Publisher and subscriber without DNS ?
Regds
Sasith
Solved! Go to Solution.
11-29-2012 08:25 PM
Hi Sasith,
Ok so, looks like you were doing it correct the first time. There could be several problems:
++ Did you add this Subscriber in the Publisher?
++ Did you get the security password correct?
++ Did you check LRO settings:
http://docwiki.cisco.com/wiki/Disable_LRO
++ Restart Cluster Manager service on the Publisher.
Let me know how it goes.
HTH.
Regards,
Harmit.
11-29-2012 07:50 PM
Hi Sasith,
Go ahead an put the ip address of the Publisher. That is what you're supposed to do in any case when DNS isn't available. Also, make sure you refer to the install document of the version you are installing. Here is the doc for version 8.5:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_5_1/install/cmins851.html#wp691628
HTH.
Regards,
Harmit.
11-29-2012 07:56 PM
HI
When I put the IP address of the PUB it says that invalid hostname !!!!
Regds
Sasith
11-29-2012 08:06 PM
Hi Sasith,
Can you click a photograph of the screen where you are stuck and upload here? Thanks.
Regards,
Harmit.
11-29-2012 08:13 PM
First Image shows when I give the hostname of CUCM PUB.
Second Image shows that when i give the IP address of CUCM PUB
Regds
S
11-29-2012 08:25 PM
Hi Sasith,
Ok so, looks like you were doing it correct the first time. There could be several problems:
++ Did you add this Subscriber in the Publisher?
++ Did you get the security password correct?
++ Did you check LRO settings:
http://docwiki.cisco.com/wiki/Disable_LRO
++ Restart Cluster Manager service on the Publisher.
Let me know how it goes.
HTH.
Regards,
Harmit.
12-04-2012 10:09 PM
Hi Harmit
Yes that works after adding the SUB hostname to PUB
Thanks
$
12-04-2012 10:25 PM
Great news! Glad to hear that did the trick :-)
Regards,
Harmit.
12-10-2016 03:18 PM
I am installing new BE7Ks with version 11.5 and am having the exact same problem. Not using DNS, and the second node is configured in the publisher. Publisher is synced to an external NTP source. I am getting the same error messages as above. Any ideas?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide