04-30-2010 01:37 PM - edited 03-15-2019 10:34 PM
I have a department that is creating WAV files for Unity Conn they ar
e setting the sampling rate to the highest, Unity connection is not excepting this. What is the correct Sa
mpling rate for Unity? G.711 of course.
Thank you
04-30-2010 02:50 PM
This would be codec-based so for G.711, I believe that would be 64 kbit/s.
Hailey
Please rate helpful posts!
04-30-2010 03:30 PM
Actually, 64kbs would be the line rate. The sampling rate should be 8 kHz/second with 8 bit samples (thus 64kbps). You can use an audio editing application to check the sampling rate.
See the following table for sampling rate and other pertinent information:
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/connection/7x/design/guide/7xcucdg025.html#wp1069840
HTH.
Regards,
Bill
Please remember to rate helpful posts.
Please remember to rate helpful responses and identify
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide