Unity express + CallManager 7.0

[habouzyad]

Hello,

I will start the installation for a new telephony ip project that i have those elements :

1- Cisco CallManager 7.0

2- Cisco 2811

3- Unity express in the same router 2811

I want know if the Unity express can be used to receive the voice mail form the CallManager?

Thank you in advance

Hicham

[Michael Owuor]

Hi Hicham,

Here's a document titled 'CallManager for Cisco Unity Express Configuration Example' that should help you integrate CUCM and Unity Express.

http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a0080289ef0.shtml

Regards,

Michael.

[Nicholas Matthews]

Hi Hicham,

Yes you can do this. It's referred to as JTAPI integration with CUCM. For CUCM 7 you will want to run the latest CUE 3.2 software. Also, be aware that there is a CUCM license and CME license - get the CUCM license or you'll have troubles.

hth,

nick