cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
492
Views
0
Helpful
2
Replies

Upgrade unity express 2.1 to 7:x

A client has unity express NM-CUE and wish to upgrade to unity express 7.x

it would be possible or it would be better to get a new module with ver 7.x.

Regards

> sh software versions

Installed Packages:

- Bootloader (Primary) 1.0.17

- Global 2.1.1

- Voice Mail 2.1.0

- Bootloader (Secondary) 2.0.0

- Core 2.1.0

- Installer 2.1.0

- Auto Attendant 2.1.0

1 Accepted Solution

Accepted Solutions

Rob Huffman
Hall of Fame
Hall of Fame

Hi Filiberto,

It looks like a new module would be required :)

**Note: The NM-CUE, NM-CUE-EC are no longer supported beginning with Cisco Unity Express version 7.1.1. Cisco Unity Express on the ISM-SRE-300-K9 module and the AIM2-CUE module are supported beginning with Cisco Unity Express version 7.1.2.

http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel7_1/install/prereq.html

Hope this helps!

Rob

View solution in original post

2 Replies 2

Rob Huffman
Hall of Fame
Hall of Fame

Hi Filiberto,

It looks like a new module would be required :)

**Note: The NM-CUE, NM-CUE-EC are no longer supported beginning with Cisco Unity Express version 7.1.1. Cisco Unity Express on the ISM-SRE-300-K9 module and the AIM2-CUE module are supported beginning with Cisco Unity Express version 7.1.2.

http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel7_1/install/prereq.html

Hope this helps!

Rob

Thanks a lot Rob,

Thanks for your time and for your clear comments.

Regards,