Hello dear friends,
I have CME 8 on ISR3945e running IOS 15.1(2)T. Basically, I need to upgrade both IOS and CME, with respective 69xx phone images because Im having an immensity of bugs Now, I have newer version of IOS, and I wonder do I need CME files separately, or they come with IOS? Is there anything else I need to do except upgrade IOS and restore the config file? Something else to download?
Thank you
Here is output from sh ver, just in case:
ISR3945#sh ver
Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.1(2)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Mon 19-Jul-10 20:13 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M1, RELEASE SOFTWARE (fc1)
ISR3945 uptime is 1 year, 4 weeks, 9 hours, 35 minutes
System returned to ROM by address error at PC 0x8F508D0, address 0x61636865 at 12:36:57 MNE Tue Jan 24 2012
System restarted at 03:00:12 MNE Thu Apr 26 2012
System image file is "flash:c3900-universalk9-mz.SPA.151-2.T.bin"
Last reload type: Normal Reload
Cisco CISCO3945-CHASSIS (revision 1.0) with C3900-SPE150/K9 with 983040K/65536K bytes of memory.
Processor board ID FCZ1413701E
5 Gigabit Ethernet interfaces
31 Serial interfaces
2 terminal lines
1 Channelized E1/PRI port
DRAM configuration is 72 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
254464K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 C3900-SPE150/K9 FOC14106Y7H
Technology Package License Information for Module:'c3900'
----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
-----------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security None None None
uc uck9 Permanent uck9
data None None None
