11-27-2006 07:06 AM - edited 03-14-2019 06:58 PM
I just upgraded CallManager 4.1 to 5.0. I need to add new IP phone device licenses. Cisco document says "Register the PAK with Cisco Unified CallManager using the License Registration web tool that is provided on CCO."
But I cannot find the License Registration web tool in CCO.
Can someone tell me the URL for License Registration web tool ?
Thanks
11-27-2006 07:26 AM
Hi Steve,
Perhaps this will help;
Migrating from Cisco CallManager 4.0(x) to 5.0(x)
This is the URL;
https://tools.cisco.com/SWIFT/Licensing/PrivateRegistrationServlet?FormId=806
Or try; http://www.cisco.com/go/license
When you migrate from Cisco CallManager version 4.0(x) to 5.0(x), the licenses that are required for existing phones and existing Cisco CallManager nodes is calculated and an intermediate file (XML file) that contains these license counts will be generated during the Cisco CallManager migration process. These licenses are given free of cost because you are already using these phones for Cisco CallManager version 4.x. If you are provisioning new phones and nodes after migrating to Cisco CallManager 5.0(x), you need to paste the intermediate license file in the License Registration window on CCO.
Use the following procedure to register existing licenses and request for new licenses.
--------------------------------------------------------------------------------
Step 1 In Cisco CallManager Administration, choose System > Licensing > License File Upload.
The License File Upload window displays.
Step 2 Click View File. A pop-up window displays that has the license information for existing phones and nodes. Copy this information. To copy the contents on this windrow, you can use Ctrl-A (Select All) and Ctrl-C (Copy).
Step 3 On the License Registration window of CCO website, in the text box provided, paste the file contents using Ctrl-V.
Step 4 You must enter the MAC address of the Cisco CallManager server that you are requesting the licenses for, and a valid E-mail Id.
Step 5 To obtain the actual license file, click Submit. A license file is generated.
Step 6 You must upload the license file to the server with the matching MAC address that you provided in Step 4. See the "Uploading a License file" section in the Cisco CallManager Administration Guide. This node takes on the functionality of the license manager.
From this doc;
Take care!
Rob
Please remember to rate helpful posts......
11-27-2006 08:27 AM
Rob,
Excellent!
Thanks a lot for your help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide