VG 310 Analog Phones registration

[mahender.velmareddy]

Is it possible to register Analog phones to standalone VG 310 gateway?  I read that we need to add dial-peers for each voice port, one inbound and one bound dial-peers. Do we required to configure anything under sip-ua?

[Roger Kallberg]

What do you mean by “register Analog phones to standalone VG 310 gateway”? A analog phone would be physically connected to a FXS port on the VG, it doesn’t register with anything. So I’m not really clear in what’s in your question. Would you mind to elaborate on what you mean?

[Rajan]

Hi Mahender,

As mentioned by Roger here, analog phones will be connected to the FXS ports on VG 310 and you need any PBX to control the VGs for call control and call routing. 

HTH
Rajan
Please mark all useful posts as helpful and solutions as accepted wherever applicable