VG200 and CMM with UCM 6.1

[Ahmed Elnagar]

Hi all;

I have an upgrade from 4.1 to 6.1 and I have VG200 and a couple of CMM modules...I need a document from cisco that tells the minimum IOS version for VG and CMM in order to work with new callmanager version...I tried so hard searching for any but in vain.

Thanks

[Rob Huffman]

Hi Ahmed,

The reason you are having trouble finding support

docs for these two products is because they are

both EoL (End of Life). That does not mean they won't work

they just aren't tested with the newest CUCM versions;

End-of-Sale and End-of-Life Announcement for the Cisco Catalyst 6500 Series and Cisco 7600 Series Communication Media Modules

http://www.cisco.com/en/US/prod/collateral/modules/ps2706/end_of_life_notice_c51-495784.html

End-of-Sale Announcement for the Cisco VG200 Access Gateway

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/prod_eol_notice09186a008032d4d4.html

**Try these widely accepted versions**

VG200

The IOS on the download page is 12.3.(26)

CMM

The IOS available wscmm-ipvoice-mz.124-15.T9.bin.

Hope this helps!

Rob