02-08-2018 04:02 AM - edited 03-17-2019 12:09 PM
I'm trying to configure a VG202 to prefix all outgoing calls with a 9, If I configure the Gateway in CUCM 11.5 and prefix with a 9 I do not get a dial tone so unable to dial the number required.
Basically we have an analogue alarm box that is preconfigured with a number to dial, this works fine when connected to a standard PSTN line because there is no 9 for an outside line, however when I try to configure it on our VG202 I cannot get the prefix 9 to work.
Is there any way I can create a dial-peer on the VG to prefix all outgoing calls with a 9.
I’ve tried the following on the VG:
dial-peer voice 9990991 pots
service mgcpapp
destination-pattern 9T
port 0/1
prefix 9
02-08-2018 07:55 AM
02-08-2018 01:07 PM
02-08-2018 01:17 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide