VG224 - can i insert an access code in the dial peer so the user does not have too

[Norm Nicholson]

I have some debit/credit machines that I want to move off PSTN's and onto Cisco analogs so is there a way to insert a  9 ( access code ) as soon as the port goes off hook. This is a trial, but I do not want to modify the debit/credit machines.

Thanks

Norm

[Jaime Valencia]

What protocol will you use???

[Norm Nicholson]

SCCP

[Jaime Valencia]

You'd need to configure a translation pattern in CUCM to add that 9

[kkoeper12]

Or create new dial patterns in a new partition assigned to a CSS that is assigned to only the VG224 analog ports. Make the dial patterns the same as the existing ones but leave off the 9.

[Rejohn Cuares]

You didn't specify what is your control server. For discussion sake, I will assume CME as other guys already posted a solution for CUCM.

Create a voice translation on the CME, config is as follows.

voice translation-rule 2
 rule 1 // /9&/
!
voice translation-profile Prefix-Nine-EFTPOS
 translate called 2
!
ephone-dn  30  dual-line
 number 8889
 description EFTPOS
 name EFTPOS
 translation-profile incoming Prefix-Nine-EFTPOS
!

When the EFTPOS terminal dials, the CME will prefix 9 automatically.

The rest of VG224 and CME SCCP integration configuration can be found here:

http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/vg224-voice-gateway/115021-vg224-voice-gateway-sccp-00.html