02-21-2012 01:22 PM - edited 03-16-2019 09:42 AM
Looking at CUCM SRND Table "Cisco Analog Gateway Features” indicates that MOH is not supported on VG224. Can anyone confirm that this is true for unicast and multicast MOH?
Chris
Solved! Go to Solution.
02-21-2012 01:44 PM
Chris,
MoH on SCCP VG224 is not supported. It is supported with H323/SIP/MGCP as per following -
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/moh.html#wp1043577
HTH
Udit
02-21-2012 01:57 PM
Chris,
Unicast with SCCP will work.
MCast won't work because of -
The above bug is not the reason but just a confirmation tha MCast is not supported.
Thanks,
Udit
02-21-2012 01:44 PM
Chris,
MoH on SCCP VG224 is not supported. It is supported with H323/SIP/MGCP as per following -
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/moh.html#wp1043577
HTH
Udit
02-21-2012 01:48 PM
Yeah, I saw that, but since it lists both unicast/multicat support I was not sure if this was the case for either one or both.
Thanks,
Chris
02-21-2012 01:52 PM
I can say that for sure that Multicast is not supported with SCCP. Let me confirm about Unicast.
Udit
02-21-2012 01:57 PM
Chris,
Unicast with SCCP will work.
MCast won't work because of -
The above bug is not the reason but just a confirmation tha MCast is not supported.
Thanks,
Udit
02-21-2012 01:59 PM
Thanks.
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide