10-02-2012 11:12 AM - edited 03-16-2019 01:29 PM
Hello All,
i configured VG224 with CUCM 8.6 but it not registering and getting bellow error
ANALOGGW-01#u
001961: *Apr 11 15:32:20.359 EDT: SCCP(ANB7487A9E31405)send RegisterMessage, protocol_ver=0x11000102
001962: *Apr 11 15:32:20.359 EDT: SCCP(ANB7487A9E31405)send IpPortMessage
001963: *Apr 11 15:32:20.363 EDT: SCCP(ANB7487A9E31405)rcvd RegisterRejectMessage
001964: *Apr 11 15:32:20.363 EDT: SCCP(ANB7487A9E31405)rcvd register rej reason: Security Error
my configration shows below
VG224 GW:
!
stcapp ccm-group 1
stcapp
!
!
voice-port 2/0
timeouts ringing infinity
!
sccp local FastEthernet0/1.920
sccp ccm 10.62.124.31 identifier 3 version 7.0
sccp ccm 10.63.124.52 identifier 2 version 7.0
sccp ccm 10.61.8.41 identifier 1 version 7.0
sccp
!
sccp ccm group 1
bind interface FastEthernet0/1.920
associate ccm 1 priority 1
associate ccm 2 priority 2
associate ccm 3 priority 3
switchback method graceful
!
!
dial-peer voice 600 pots
service stcapp
port 2/0
!
ANALOGGW-01#sh sccp
SCCP Admin State: UP
Gateway Local Interface: FastEthernet0/1.920
IPv4 Address: 10.61.8.13
Port Number: 2000
IP Precedence: 5
User Masked Codec list: None
Call Manager: 10.62.124.31, Port Number: 2000
Priority: N/A, Version: 7.0, Identifier: 3
Trustpoint: N/A
Call Manager: 10.63.124.52, Port Number: 2000
Priority: N/A, Version: 7.0, Identifier: 2
Trustpoint: N/A
Call Manager: 10.61.8.41, Port Number: 2000
Priority: N/A, Version: 7.0, Identifier: 1
Trustpoint: N/A
Alg_Phone Oper State: ACTIVE_IN_PROGRESS - Cause Code: CCM_REGISTER_FAILED
Active Call Manager: 10.61.8.41, Port Number: 2000
TCP Link Status: NOT_CONNECTED, Device Name: ANB7487A9E31400
Reported Max Streams: 1, Reported Max OOS Streams: 0
Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30
Supported Codec: g711ulaw, Maximum Packetization Period: 20
Supported Codec: g711alaw, Maximum Packetization Period: 20
Supported Codec: g729r8, Maximum Packetization Period: 220
Supported Codec: g729ar8, Maximum Packetization Period: 220
Supported Codec: g729br8, Maximum Packetization Period: 220
Supported Codec: g729r8, Maximum Packetization Period: 220
Supported Codec: ilbc, Maximum Packetization Period: 120
10-02-2012 11:26 AM
How is configured on CUCM? Can you post an screenshoot!
Did you configure the last 10 digits of the Mac Address of you interface?
Regards
Leonardo Santana
10-02-2012 11:31 AM
sorry i forgot to add in this post
yes i configured as gateway as SCCP with last 10 digit of VG224 mac. i did same configuration that working with other cucm cluster
10-02-2012 11:38 AM
can you post the this commands outputs:
show stcapp device summary
sh sccp all
10-02-2012 12:57 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide