VG224, VG248 and CUCM 11.5

[dmcgary]

Does anyone know if a VG224 or VG248 will "work" with CUCM 11.5?

[Jaime Andres Roldan Schmidt · Accepted solution]

Hello dmcgary,

According to CUCM compatibility Matrix in here: https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/unified/communications/system/Compatibility/CSR-Compatibility-Matrix-InteractiveHTML.html

Yes VG224 should work, with software version 15.1(4)M10 and VG248 should work with software version 1.3(2).

Best Regards, Jaime.

Please rate if you find this answer helpful.

[dmcgary]

Thank you for your quick response!

[saif musa]

Hi, 

What if im planning to use SIP VG224 ?? could i still use them with BE7000M(M5)A ??? Also i attached copy of VGs Confiuration if needed

Thanks

[Roger Kallberg]

As you question is off topic of the OP I’d recommend you to post your question in your own post.

[R0g22]

Why not move to VG-3XX ? VG-224 is still fine but VG-248 is extinct. :)

[dmcgary]

We have many of these, and have been slowly moving to VG310 and ATA190's. We will do this over several years, as budgets are tight.