VG310 Ampphenol port: Male or female?

[Yangjp715]

Hi all,

I have to purchase a RJ21 cable to connect  VG310, is there anyone who know is the female or male on the amphenol end? Cat3 or cat5 pair?

Thanks,

Eric

[Nithin Eluvathingal]

just go through the below link. Hope it helps.

https://www.cisco.com/c/en/us/td/docs/routers/access/vg310_vg320/hardware/installation/guide/bm_vg310_vg_320_voice/bm_vg310_vg_320_voice_chapter_011.html

What I  found from my friend who recently deployed for their customer. I am not sure if your are looking for something like this.

[Yangjp715]

Is it male to VG310 and female to the patch panel? Thanks

[Nithin Eluvathingal · Accepted solution]

I never tried this cable, but the team who deployed it said, the male to VG and female to Patch Panel. and also they mentioned the cable connection is not that complicated. Below is one more image I received from the team who deployed it. hope this help you. 

[fperezromero]

The AMP Telco RJ21 connector that is connected to the VG is a male connector.
The other end is usually a panel with 24 female RJ45 ports, although it is available in other finishes. Here is a wide variety of terminations and lengths for these cables: https://cables24.com/en/17-telco