VG350 mgcp pulse

[seva]

I have CUCM 12.5 and Gateway VG350. VG350 registered by protocol MGCP. Pulse dialing does not work. 

In what mode does the pulse dialing work?

Thanks

[Roger Kallberg]

With pulse dialling do you refer to call with a rotary dial telephone? If so I’m not sure if that’s supported by anything these days.

[seva · Accepted solution]

Registration with MGCP did not solve the problem.

Pulse dialing works with SCCP registration

[Roger Kallberg]

Any specific reason for why you don’t have it setup with SCCP then? What’s the reason for why you’d want to use MGCP if this would work with SCCP?

[seva]

Used SCCP. The solution works. I did not find any information that this functionality does not work on MGСP. Perhaps my case will save someone time.