VIC2-4FXO on Cisco 2951

[Daniel Buendia Juarez]

I have a Gateway 2951 with release software 15.4(1)T3, this is compatible with a VIC2-4FXO module?

Thanks.

Regards!

[Rob Huffman]

Hi Daniel,

Yes this would be supported. Check page 6 of this guide;

http://www.cisco.com/c/dam/en/us/products/collateral/routers/1900-series-integrated-services-routers-isr/aag_c07_563807.pdf

Cheers!

Rob

[Daniel Buendia Juarez]

Thanks a lot, Rob.

Regards.