11-08-2023 10:27 PM
I have one router cisco 43331 ISR router to be configured for Voicde SIP ling from PSTN. when i tried to put voice cammand , its not supporting any command for voice service., I m thinking this may be licence isuue. because uck9 not active, can anybody confirm this.Below is result from sh licence . if licence issue what shoud i do to get licence.
version of IOS: Cisco IOS XE Software, Version 16.09.05
Router#sh lic
Router#sh license
Index 1 Feature: appxk9
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Index 2 Feature: uck9
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 3 Feature: securityk9
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Index 4 Feature: ipbasek9
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Index 5 Feature: FoundationSuiteK9
Period left: Life time
License Type: Permanent
License State: Active, Not in Use
License Count: Non-Counted
License Priority: Medium
Index 6 Feature: AdvUCSuiteK9
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 7 Feature: cme-srst
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: 0/0 (In-use/Violation)
License Priority: None
Index 8 Feature: hseck9
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Index 9 Feature: throughput
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 10 Feature: internal_service
Solved! Go to Solution.
11-08-2023 10:39 PM
11-08-2023 10:41 PM - edited 11-08-2023 10:42 PM
Hello @jaleelkv,
"uck9" feature is in an "EvalRightToUse" state, which means it's an evaluation license that has not been activated. This could be the reason why the voice commands are not working.
Please enter @Nithin Eluvathingal command suggested.
This command should activate the "uck9" license.
11-08-2023 11:08 PM - edited 11-08-2023 11:10 PM
Do
licence boot level uck9
And answer <yes>
license boot level sets the overall license level for the entire router, license boot module allows you to set the license level for specific modules or subpackages.
11-09-2023 12:22 AM - edited 11-09-2023 12:23 AM
You are in EvalRightToUse.
Do
license right-to-use activate (move) uck9 to be in permanent
Reload again after that and check the license status.
https://www.cisco.com/c/en/us/td/docs/routers/access/sw_activation/SA_on_ISR.html
11-08-2023 10:39 PM
Do the above.
11-08-2023 10:58 PM
11-08-2023 11:08 PM - edited 11-08-2023 11:10 PM
Do
licence boot level uck9
And answer <yes>
license boot level sets the overall license level for the entire router, license boot module allows you to set the license level for specific modules or subpackages.
11-08-2023 11:21 PM
11-08-2023 11:26 PM
even after boot using
licence boot level uck9, i cant enter voice commmand, licence showing 60 days validity as below
Feature: uck9
Period left: 8 weeks 4 days
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA accepted
License Count: Non-Counted
License Priority: Low
11-08-2023 10:41 PM - edited 11-08-2023 10:42 PM
Hello @jaleelkv,
"uck9" feature is in an "EvalRightToUse" state, which means it's an evaluation license that has not been activated. This could be the reason why the voice commands are not working.
Please enter @Nithin Eluvathingal command suggested.
This command should activate the "uck9" license.
11-08-2023 11:04 PM
i found as below.. whicch one shoud i use
Router(config)#license boot?
boot
Router(config)#license boot ?
level which level to boot
suite which suite to boot
Router(config)#license boot le
Router(config)#license boot level ?
appxk9 Appx License Level
securityk9 Security License Level
uck9 Unified Communication License Level
Router(config)#license boot suite ?
AdvUCSuiteK9 Advanced Unified Communication Suite
FoundationSuiteK9 Foundation Suite
11-08-2023 11:54 PM
Thank you all.. now i can use voice command , but i have one doubt. what will happend after 60 days of licence validity . can anybody help me regarding this
Now uck9 licence remaing only 59 days as below
Index 2 Feature: uck9
Period left: 8 weeks 3 days
Period Used: 6 minutes 26 seconds
License Type: EvalRightToUse
License State: Active, In Use
License Count: Non-Counted
License Priority: Low
11-09-2023 12:22 AM - edited 11-09-2023 12:23 AM
You are in EvalRightToUse.
Do
license right-to-use activate (move) uck9 to be in permanent
Reload again after that and check the license status.
https://www.cisco.com/c/en/us/td/docs/routers/access/sw_activation/SA_on_ISR.html
11-09-2023 01:46 AM
RTU after 8 weeks it will move to permanent.
upgrading to latest version you must connect with a smart account
11-09-2023 01:53 AM
11-09-2023 03:03 AM
Highly recommended to remove unwanted files from flash.
removing old iOS images will free up space.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide