Voice gateway for branch.

[Rafael Jimenez]

I have cme in the main site. I need a cheap voice gateway (router) with 4 fxo ports for the branch.. Which model can I use?.

The wan connection is dedicated 1024kbps.

Thanks.

[Chris Deren]

Any of the 29XX ISR G2 will do just fine. 2901 for example would be a cheap candidate.

Chris

[Rafael Jimenez]

The ip phones in the branch must register with cme at the branch. the fxo are for local calls.

the 2900 is an expensive solution.

I would like to know, if a router 800 with a voice gw image will work?.

[Chris Deren · Accepted solution]

The 880 can support 5 CME stations:

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps4625/data_sheet_c78-695471.html

880 data sheet:

http://www.cisco.com/en/US/prod/collateral/routers/ps380/data_sheet_c78_459542_ps380_Products_Data_Sheet.html

Though it has only 1 FXO port.

Another option is 1841E

http://www.cisco.com/en/US/prod/collateral/routers/ps5853/ps8321/data_sheet_c78-641296.html

with 4 built-in FXO ports

HTH, please rate all helpful posts!

Chris