11-18-2013 12:29 AM - edited 03-16-2019 08:27 PM
I have seen a post that describes how we can use an SNMP mib to gather information regarding the number of H.323 calls:
1.3.6.1.4.1.9.9.27.1.1.3.1.4 -> "ciscoCallHistoryCalledNumber"
1.3.6.1.4.1.9.9.27.1.1.3.1.5 -> "ciscoCallHistoryInterfaceNumber"
I’d like to find out how many calls on average are placed across the WAN link (G711/G722 or G729) verse the PRI-onramp over a period of time.
I would use a tool such as cacti to store the data but I need to know if there is a MIB for this?
Does anyone on the list have any idea for how this can be done?
Thank in advance
Darin
11-18-2013 07:13 PM
BUMP!! / hi again / essentially I am asking if there is a way to measure h.225 / h.245 over the WAN from CUCM to gateway over a period of time / any ideas?
Thanks again in advance
Darin
11-18-2013 07:45 PM
Does it have to be SNMP? (Of which I know it can be done on an E1).
RTMT does it off the shelf, using performance monitoring. on active calls and or channel usage.
on MIBs check:
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a00801abe59.shtml
Object | cpmActiveDS0s |
OID | 1.3.6.1.4.1.9.10.19.1.1.4 |
=============================
Please remember to rate useful posts, by clicking on the stars below.
=============================
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide