Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Good morning, I've a router 2811 equipped with a NM-CUE module.The router actually have IOS 12.4.24 and CUE have a verion 7.0.I need to upgrade the router IOS with a release 15.1 .The CUE express 7.0 works with a IOS 15.1?I don't...
Hi Guys,I have a voice gateway with a BRI card on slot 0/3/0 (port 0/1) and I wanted to terminate both WAN and PSNT connection to the same gateway with MGCP protocol, and as I'm new to voice over IP world can anyone suggest/recommand me a proper guid...
How to add a cisco conference speakerphone station CP-8831 to CUCM 7.1.5? i cannot find the button template when i try to add the new button template any idea? thanks!
I have the CUCM 7.1.5 version, bought the new CP-8831 and cannot find the button template, how can i add the button template? what are the steps? thanks!
Hi, One of our customer needs SIP trunking services. Cuurently they have 3 different Legacy TDM PBXs & is willing to use existing PBXs rather than moving to IP PBX. How can we acheive this?Option 1: TDM PBX ---->QSIG--->Cisco ISRG2 Gateway ...
I can navigate to the User Options web page but can never log in. I eiter get invalid username/password or I get HTTP Status 404. Is there a service that is not functioning properly? Or, am I usining the wrong user/password? The one I use is the u...
Guys:Sticky wicket here. We have a CUCM 8.5.1 SR3 cluster connected via SIP to a 3945E running 15.3(3)M as the CUBE.Supervised Transfer of OffNet callers to OffNet destinations works like a champ.Blind Transfer fails every time. It seems like the CUB...
All,CUCM 9.1 with 9.1 CUPS. Jabber contacts have the full phone number which seems to be auto-populated. Where can I go to change the phone number of the contact to their extension instead of the DID?Thanks in advance. All replies rated. ...
Hi there,Just finished a migration from BE5K to BE6k and I have some phones with issues accessing the voicemail by pressing the Messages button. they receive a message that says Select Service. this was working before the migration off course!do you ...
Dears,I installed a CUP publsher version 9.1.1.100008 after that i upgraded to 9.1.1.20000-5., Now i purchased a redundant hardware server and i am trying to install CUP 9.1.1.100008 but it fails saying the publisher version is different than th...
Hello,could you help me, Is it possible to perform calls between ip phones (sip 69xx) which is registered on the same CME 9.5 without installed PVDM.
What does the message mean? I am about to migrate new 6.1 to replace 4.1 servers. The system seems confused because the provisioned IP Address is not the DNS address. Will this problem go away after the 4.1 servers are removed and the 6.1 servers ...
Hello all, It has become obvious that I need to learn more about SIP and how to configure/troubleshoot SIP trunks in a Cisco environment. Can you all suggest some resources that I can use. Are there any good classes out there?
We will be upgrading our infrastructure from 7.1(3b) to 9.X in the next few months, but we are also implementing a new CRM system for screen pops and ticket flow purposes with our Call Center. Their application calls for the the Cisco TSP to be inst...
All,I need to configure an anouncement line. Users will call in, hear the greeting and then get disconnected. No ability to leave a message. The greeting needs to be able to be updated by someone calling the same number, pressing # and being able ...
