cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2042
Views
0
Helpful
19
Replies

voice loss with the huge data sending through the phone

Sergey Balyura
Beginner
Beginner

Hello, everybody!

 

need help!

 

I have CUCM 7.1

I have a lot of "phone+PC" sets where PS' cable inserted in a phone. and phone is going into the switch

 

I've discovered that when I put a big shunk of data from PC to anywhere the voice from me is degraded. the other side receive a lot of voice drops.

 

it repeats even if both the phones are on the same switch.

 

I looked into the "show interface". there is no drops in input queue of my interface.

 

maybe the built-in switch in the phone works not good...

 

please help :)

19 Replies 19

Mohammed al Baqari
VIP Advisor VIP Advisor
VIP Advisor
What is the load output of show interface during data transfer

5 minute input rate 37242000 bits/sec, 3133 packets/sec
5 minute output rate 1178000 bits/sec, 1933 packets/sec