Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I have noticed that lately my CUCM and phone directories have decided to no longer talk.Normally, when a user gets a phone I go into CUCM and edit the Device, save and apply, then I edit the line, and save and apply.On the device I just change the De...
Hi all,I have a cusotmer with a setup that runs as follows:- SIPGW -> CM11 -> CM7A andSIPGW -> CM11 -> CM7BAll links betweek SIPGW and CM's are SIP. All handsets are SCCP. When a call comes in from SIPGW for a phone registered with CM7A, all calling...
Hi all,My customer have buyed a cisco phone 8851 SIP.I haven't account on CUCM, I have use a tftp server to configure it (great thanks to cisco for this beautifull idea : no interface administration on phone's GUI or http server).So, now I must chang...
So I've got my CUCM 11.5.1.12900-21 installed and pretty much in a default state. Only exception is that I've added an entry for the IM & P server into the CUCM Server listing, as is required for installation of IM & P. We are installing from an ISO ...
Im trying to upgrade cucm v 9.1 to 11.5.1 with " solarwinds sftp/scpHowever cucm is still saying "the remote server could not be located " Please find attached screenshots of cucm and solarwinds sftp /scp anyone experience with this?Am i doing someth...
Hi AllWe are getting lots of errors from the CIMC of my call manager, UCS MC220 Chassis.The disk was replaced a week ago due to a predicted failure, now it keeps saying that the disk is not properley inserted and to try reseating it.Our provider says...
Hello, I would like to update the field ASCII Display (Caller ID) of a Line of a User Device Profile. My problem is that we have around 300 User Device Profile to update, and each with different contents to update in this field. I think I understand...
Hi, Where can I acquire the CiscoRingToneCreator utility or something like that to make a custom ringtone for a Linksys SPA942 IP phone? It appears that this utility is almost impossible to find anywhere, and all the manuals say it's required for the...
Hi, I am trying to do resiliency test for 3rd party call manager with Cisco phones. I am not using CUCM at all. When I am trying to to give the domain what I have created for resiliency, somehow DNS SRV is not happening. So, I am just curious whethe...
I havn't found any dictionary for cp7861 with 3pcc fw. Can someone help me?
I just want to share my findings, in case it is of any benefit to the community.I find that when the command "pass-thru content sdp" is used, During the call set up process, while the CUBE doesn't at all inspect SDP portion of the SIP request, it d...
Hello folks..I am facing an issue.I am trying to do forward all .But i am not able to do.Any threads...please suggestCucm version: 11.5.1 From cucm, admin page I can give a forward all..but at user end they are not able to input anything when they pr...
Quick question (time is running out for us, so a quick reply would be appreciated :-))We have a new install of CUCM 11.5 on a Cisco B6000/UCS 220 server. We're initially helping remotely but will be onsite next week. I don't know if the vendor did ...
Hello. I try to install CUCM 11.05 onto KVM. I moved mv Cisco/hssi/server_implementation/KVM/QEMU/shared/bin/api_implementation.sh.proposed to Cisco/hssi/server_implementation/KVM/QEMU/shared/bin/api_implementation.shand repuild ISO.mkisofs -R -J -D ...
Hi, I have 2 new links to set up to the DRC and Conakry with a CCME I have configured but I have errors, here are debugs and config. No calls possible... Do you have an idea? I had already had problems for a connection on this post: https://suppor...
