04-26-2015 08:18 PM - edited 03-17-2019 02:48 AM
Hi all,
I have CUCM 10.5 with Cisco 7821 and 7945 endpoints. Internal calls are fine. However, I get voice quality issue with outbound calls from Cisco 7821 endpoint. The lost packet rate is always about 2 % with just Cisco 7821 series. Meanwhile, I don't get any lost packets with Cisco 7945 endpoints in same outbound calls. My attached files are call statistics of them.
I also try to test by moving the Cisco 7821 the closest with the voice gateway ( same switch). But, there is still lost packets.
Any ideas for me?
Thuc
04-26-2015 10:32 PM
Hi Thuc,
If you have already tested with the latest firmware of 7821 then you may need PCM capture from the gateway to check which side is causing the issue.
www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/voiceport/configuration/15-mt/vp-15-mt-book/voi-pcm.html#GUID-58294EF2-A10B-4883-AB6C-5C2C30C33509
HTH
Manish
04-26-2015 11:41 PM
Thanks Manish,
Do you doubt lost packet from PSTN side? Follow your link, I will capture the call in my voice gateway. Then what will I do next?
Thuc
04-26-2015 11:54 PM
You can either open a TAC case to get them analyzed or you can try an alternate method described below
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-system/115749-analyze-pcm-data.html
HTH
Manish
04-26-2015 11:57 PM
Thanks for your advice.
Thuc
04-14-2016 07:35 AM
Did you find a fix for this?
I also have 7821 phones and see similar issues on occasion.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide