VoiceMail in ISR4351-v CME

[chavez.zibil]

Hi, 

It is posible to have VoiceMail on ISR4351 voice bundle with CME licencing? In ISR 3900 I remember to use AIM card for this propouse (CUE), but now I can't.

Thank you for your help.

Regards,

javier

[R0g22]

ISR-4k do not support SRE/SM modules. You have the following options -

1. Use service container on ISR-4k to run vCUE (NIM-SSD)
2. Use a UCS-E module to run CUE as a VM
3. Run CUE as a VM on a UCS server.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/rel9_0/rel_notes/cue_release-notes-book.html

[chavez.zibil]

Thank you very much for quick response.
I have add UCS with vmware
1.20
UCS-EN140N-M2/K9

FL-UCSE-VS6-FND



And I understand I now must add the licence,

L-CME-CUE is OK?

Thank you very much.
Regards,
Javier

[R0g22]

What CUE version you plan to use ?

[chavez.zibil]

We are on quotation stage, so Any that could be run on the 4351 and give the VoiceMail funcionality.

THank you very much

Javier

[R0g22]

Following are the CUE licenses required -

 

[R0g22]

CSL is supported on vCUE version 9.0.3 and lower. Starting 9.0.3, license files are not required. Licenses are activated by default and set to platform maximum. Starting 9.0.5, CUE only supports Smart Licensing. Check the document that I have shared earlier.