11-09-2012 10:45 AM - edited 03-16-2019 02:06 PM
Hi Guys,
Calls for 2 extensions Eg. 50002 and 50003 and routed to another extension 50001. All the three phones have another shared line 50000. I checked in CUC the respective extensions are configured for all the three users..
Please let me know what needs to modified.. Thanks in Advance..
11-09-2012 11:32 AM
Hi Jack,
Can you explain where the voicemail is currently going (I'm guessing
50002&50003 respectively) and where you would like the voicemail to
route?
Are you trying to get the voicemail to end up in the 50000 mailbox or
where exactly?
Cheers!
Rob
"And if I should fall behind
Wait for me" - Springsteen
11-09-2012 12:03 PM
Actually. When the user 50001 is forwards calls to the other 2 extension, and when they don't pick up the call ends up in User 50001's VM. instead it need to end up at thier respective extension 50002 or 50003...
Thank YOu..!
11-09-2012 12:21 PM
Hi Jack,
In the default CUC configuration the CLID that is passed to Connection
with your set up will always be 50001. That is why you keep getting the greeting
for 50001
You can have a look into this "System-wide" setting which is available in Unity Connection 7.x and later ;
Via
Cisco Unity Connection Administration
Advanced (towards the bottom of the page)
Conversation Configuration
**Use Last (Rather than First) Redirecting Number for Routing Incoming Call**
You would need to think about what impact this might have on your overall setup, but it would allow
calls that route from 50001 to either 50002 or 50003 via forward to end up in the "forwarded" mailbox rather
than 50001 every time.
Cheers!
Rob
"And if I should fall behind
Wait for me" - Springsteen
11-09-2012 01:36 PM
Thank you Rob..!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide