hello there. Looking for advice to solve voip routing problem. I have 3 locations:
HQ office (A) and two branch offices (B and C). Each office has its own call pattern. A... for HQ B... and C... for branch officies respectively.
I dont know how to route calls from office B to A via voice-port 0/0/0:15 and from C to A via voice-port 0/0/1:15.
there is my POTS dial-peer configuration. for now I use only one voice-port for all incoming calls.
dial-peer voice 1000 pots
destination-pattern 1...
no digit-strip
direct-inward-dial
port 0/0/0:15
forward-digits all
I've attached scheme for better understanding.
Sincerely,
GRInch