07-23-2014 01:18 AM - edited 03-16-2019 11:29 PM
i need sccp ata device. ata 186 end of sale. what is insted ?
ata 190 is sip.
07-23-2014 01:44 AM
Hello
Kindly find the below link :-
Based on my information only 186 & 188 sccp , but bith if them end of sale and all existing ATAs support only sip
http://www.cisco.com/en/US/products/hw/gatecont/ps514/prod_eol_notice09186a008032d530.html
If you need additional information about road map for Cisco sccp ATA. Find the below:-
http://www.cisco.com/cisco/web/siteassets/contacts?locale=ga_IE&level1=85&level2=92&level3=93
thanks
please rate all useful information
07-23-2014 01:57 AM
Hi ,
[+5] to Kamal
You need to go with Cisco ATA 190 which is SIP based since ATA 186[SIP/SCCP] ,187[SIP] and ATA 188[SIP/SCCP]. But all are End of Sale.
http://www.cisco.com/c/en/us/products/collateral/unified-communications/ata190-2-port-adapter/datasheet-c78-731473.html
regds,
aman
07-23-2014 03:11 AM
I'd never heard of the ATA 190. Thanks for the heads-up!
Looking at the product page of the ATA 187, I can't see any end of sale notice for it. Do you have a link for this?
GTG
07-23-2014 03:18 AM
Silly me, the link to the ATA 187 End of Sale notice isn't on the ATA 187 product page. Why would anyone think of putting a link there?
http://www.cisco.com/c/en/us/products/collateral/unified-communications/ata-180-series-analog-telephone-adaptors/eos-eol-notice-c51-732166.html
GTG
07-23-2014 01:51 AM
You could use a VG202. That supports SCCP. But a VG202 is insanely expensive. Why do you need an SCCP ATA?
GTG
07-23-2014 04:46 AM
because I want to use the same one number on two phones (sccp 7965 and sccp ata and wireless analog dect phone)
07-23-2014 04:50 AM
Not sure what your call control platform is, but there's nothing in CUCM stopping you having the same number on devices with different protocols. I'm sure here we've got numbers on both SCCP & SIP devices.
GTG
07-23-2014 05:17 AM
cucm 9.1
when I use the same number on sccp7965 and another sip phone, and when calling this number both phones do not ring together. ringing only sccp phone. and it is impossible to hold call on first sccp phone and resume call on sip phone
07-23-2014 05:29 AM
I've just checked our cluster, and this definitely works. (We're on CUCM 9.1 too)
I suggest you start a new thread here to investigate why your scenario isn't working.
GTG
07-23-2014 05:40 AM
tnx. I will check again with sccp and sip phones
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide