Power consumption

[mithil_r]

Can someone please let me know the power consumptions of FULLY LOADED 7301,7606,7609,catalyst 6513 and GSR 12,410????

I'm unable to gather the information.

Regards,

MITHIL

[sultan-shaikh]

Hi,

See if this is useful....

For Catalyst 6500:

http://www.cisco.com/en/US/customer/products/hw/switches/ps708/products_installation_guide_chapter09186a008020e0d3.html

For 7600:

http://www.cisco.com/en/US/customer/products/hw/routers/ps368/products_installation_guide_chapter09186a008007c8a6.html

For GSR 12K series:

http://www.cisco.com/en/US/customer/products/hw/routers/ps167/prod_maintenance_guide09186a00800a4a35.html

http://www.cisco.com/en/US/customer/products/hw/routers/ps167/prod_maintenance_guide09186a00800eaabd.html

[romccallum · Accepted solution]

The links below are absolutely fine - although - you ask for power consumption of a fully loaded chassis - the answer to that one is.....it depends on what cards you install. i.e. on the 12k I could batter in 10gig ports - do you think a chassis full of 10g blades will run the same power as a chassis full of stm-1 ports. Recently Cisco have modified their power units on the 12k and the 7600 (I reckon cause the newer cards are now drawing much more power than the older ones).

[sultan-shaikh]

Thanks for updating me as well Rom...

Cheers,

~sultan