10-01-2018 10:06 PM
Hi,
I am having issues with configuring MPLS on Cisco ISR 4300 router. The router does not take any MPLS command. Following are the details of the device and the issue.
Router: ISR 4300
IOS: Cisco IOS Software [Fuji], ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.8.1, RELEASE SOFTWARE (fc3)
Issue:
Router (config)#mpls ?
% Unrecognized command
Router(config)#interface gigabitEthernet 0/0/0
Router(config-if)#mpl
Router(config-if)#mpls ?
% Unrecognized command
Router(config-if)#mpls
10-01-2018 10:20 PM
Hi All,
I think I found the solution. Had to activate the following license.
(config)#license boot level appxk9
10-01-2018 10:21 PM
Hi,
You need advanced AX license to enable the MPLS features. This is available on 4351, 4331, 4321 routers in 4300 series.
Regards,
Deepak Kumar
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide