Cisco ASR 9010 OC48 4-Port SPA POS Interface Counters not incrementing
Really need some assistance I have a Cisco ASR 9010 which I've recently installed. Its reasons Cisco XR 4.3.2 which I believe is the standard XR image. I have a SIP 700 installed along with an STM-16 SPA (4-Port) OC48 SPA.
I have brought up a circuit between the Cisco ASR 9010 and a Cisco 12K XR. However for some reason I do not get incremental packet counts under the interface even though I've configured the controller correctly.
The interface counters do not increment indicating that there could be a problem with the SPA.
I'm sure what what is happening here.
Can someone tell me what the issue may be and what I need to do fix it.
loadbalancing is one of the more complex items in hardware forwarding. of course we have talked about it many years on cisco live (id 2904) with ever incrementing more detail. and there is the support forum article on loadbalancing.
IntroductionArchitecture Building BlocksIOS-XR RoutersConfigurationPerformance VerificationOptimizationStrict timerSome more verificationThe CollectorInfluxDBDatabase statistics and HealthClosing comments
This document was written in collaboration with:
IOS-XR MPLS TE Auto Tunnel Backup Bandwidth Protection Current Implementation of MPLS TE Auto Tunnel BackupPotential issue with current implementation of MPLS TE auto tunnel backupEnhancement to MPLS TE auto backup in IOS XR 7.5.1Supported HardwareConfig ...
we are trying to monitor the Cisco 9148s SFP status, and have get the Sensor's dBm value from the CISCO-ENTITY-SENSOR-MIB table, meanwile , it has an Index value like "30000xxxx",such as "30001773", entsensorValueTable but we can't sure how to l...
Check out our latest release on Cisco Routed Optical Networking solution. Listen: https://smarturl.it/CCRS8E24Follow us: https://twitter.com/ciscochampion Disruptive network transformation may only happen once a decade. First movers c...