08-28-2022 07:28 AM
we have cisco router ISR4431 and we are working on upgrading our internet link form 200 to 300mb, do we need a performance license or no need ?
08-28-2022 07:57 AM
this model support 500Mbps aggregate throughput by default.
08-28-2022 11:47 PM
so if the link speed download/upload 300/300, that's mean i need 600 throughput.
08-29-2022 01:20 AM - edited 08-29-2022 01:21 AM
yes, they always say aggregate throughput (500), but you must calculate exactly as you said(600) if you want to have the full capacity of the link. So - for 300/300 line, if you want to use the full BW of that link, default aggregate throughput will not be enough. Another question is, do you want to use encryption on the router, or you just want to use plane routing/cef? And another question is other features as ACL/ZBFW etc.? You need to put this all down, then we will be able to respond.
08-28-2022 08:35 AM
First check what License you have installed, by default as mentioned below 500MB.
08-28-2022 05:39 PM
Post the complete output to the following commands:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide