07-03-2005 05:50 AM
Dear Sirs!
We have 6506 with WS-SUP720-3B with s72033-pk9sv-mz.122-18.SXD4.bin with FlexWAN with PA-4T installed.
But I cannot find XCONNECT or MPLS L2TRANSPORT ROUTE commands
on serial ports with HDLC or PPP encapsulations.
Is 65xx supports HDLCoMPLS or PPPoMPLS with such configuration?
If not, what is the hardware configuration for such task?
Best regards,
Maxim
Solved! Go to Solution.
07-03-2005 09:26 AM
By the way, here's the Product Bulletin stating the support of HDLC over MPLS starting with 12.2(18)SXE.
http://www.cisco.com/en/US/products/sw/iosswrel/ps1838/prod_bulletin0900aecd80278bc2.html
Hope this helps,
07-03-2005 08:54 AM
HDLC over MPLS is supported on the 6500 starting with 12.2(18)SXE (Rockies 2).
Hope this helps,
07-03-2005 09:26 AM
By the way, here's the Product Bulletin stating the support of HDLC over MPLS starting with 12.2(18)SXE.
http://www.cisco.com/en/US/products/sw/iosswrel/ps1838/prod_bulletin0900aecd80278bc2.html
Hope this helps,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide