MPLS label packet count

[ketimun123]

Is there a way to find out how many packets/bytes with a certain MPLS-label are sent out an interface ?

Looking for a command like in ipv4

access-lists x x log

Thanks

[mounir.mohamed]

Dear Ketimun,

In IOS-XR (show mpls packet counters..) can do the job and below is the guide line for this command

http://www.cisco.com/en/US/docs/ios_xr_sw/iosxr_r3.0/mpls/command/reference/gr3fwd.html#wp1509663

For native IOS, i didn't notice this before but let's check.

[sergio.danelli]

wouldn't a simple "show mpls forwarding-table" do it?

7200-SF04#show mpls forwarding-table labels 52

Local Outgoing Prefix Bytes tag Outgoing Next Hop

tag tag or VC or Tunnel Id switched interface

52 Untagged 10.6.0.0/16[V] 33776412 Se2/1/16:0.3 point2point

Bytes tag switched column

[Harold Ritter]

Sergio,

This will definitely work on the P router(s) (and egress PE if a service label is used) but not on the ingress PE.

Regards,