05-11-2010 02:50 AM
Dear Gurus,
Im trying to configure port based mpls, however i find my 7206 doesnt support any encapsulation mpls, only l2tpv3. Is this IOS dependency?
Cisco IOS Software, 7200 Software (C7200-ADVIPSERVICESK9-M), Version 12.4(9)T1, RELEASE SOFTWARE (fc2)
R2(config-if)#xconnect 3.3.3.3 100 encapsulation ?
l2tpv3 Use L2TPv3 encapsulation
tia.
Solved! Go to Solution.
05-11-2010 06:05 AM
Hello Jepoy,
according to feature navigator it is supported on C7200 port mode C7200
but you need some specific feature sets
like
c7200-adventerprisek9-mz.124-24.T2.bin |
I have a pair of C7200 with advanced security and xconnect is not supported on them
Hope to help
Giuseppe
05-11-2010 06:05 AM
Hello Jepoy,
according to feature navigator it is supported on C7200 port mode C7200
but you need some specific feature sets
like
c7200-adventerprisek9-mz.124-24.T2.bin |
I have a pair of C7200 with advanced security and xconnect is not supported on them
Hope to help
Giuseppe
05-11-2010 07:18 PM
Hi Giuseppe,
Got it, thanks a lot.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide