12-05-2009 11:40 AM
does sup32 on 7600 router support mpls over gre, my uplinks
to the core are connected via sup32?
12-07-2009 12:08 AM
Hello Atif,
in the following link the datasheet of sup32
table1 contains the following:
03-08-2016 07:26 AM
Hi Giuseppe
I am having same problem with MPLS over GRE on PFC3B that equipped the SUP32, does it actually work/supported.
https://supportforums.cisco.com/discussion/12916656/mpls-double-lable-swap-router-looping
SUP32 datasheet indicates it does with some less performance as compared to SUP720.
However TAC said it's NOT supported but I couldn't find it written anywhere.
"MPLS over GRE is not supported officially on PFC3B that equipped the SUP32.
This Feature is limited to SIP-400 with GE SPA as core facing interface and running SRB1 or greater using Sup720 and RSP720."
Any comments/suggestion will be highly appreciated, Many thansk in advance.
Regards
Trilok
03-10-2016 12:31 AM
Hello Trilok,
my answer was based on available documentation.
If Cisco TAC says that Supervisor 32 with PFC3B does not support MPLS over GRE they are right they have access to internal resources that are not available to people outside Cisco.
In addition, internal tests can have been performed in Cisco that provided that feedback.
So I'm afraid you need to think of an hardware upgrade to Sup720 and this can be valid also for the other thread that you mention that showed basic problems with MPLS over GRE and Sup32.
Hope to help
Giuseppe
04-07-2016 06:47 AM
Thanks a lot :)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide