VPLS -L2 VPN

[Ratheesh mv]

Hi friends ,

L2vpn

bridge group test
bridge-domain test
mtu 9202
neighbor 1.1.1.1 pw-id 5292 ---->Doubt

!
vfi test
neighbor 2.2.2.2 pw-id 5292 ---->Doubt
pw-class for_test

!

pw-class for_test
encapsulation mpls
control-word
load-balancing
flow-label both

What is the difference between neighbor 1.1.1.1 which is configured under bridge-domain & neighbor 2.2.2.2 which is configured under vfi test.

show l2vpn bridge-domain bd-name test shows 1.1.1.1 under List of access PWs and 2.2.2.2 under List of VFIs.

Could anyone explain the difference

Thanks in advance.

[balaji.bandi · Accepted solution]

Since we do not know the toplogy to explore more.

as of the information of the post

Establishes a Layer 2 VPN (L2VPN) virtual forwarding interface (VFI) between two or more separate networks and enters VFI configuration mode.

5292 - pseudowire-id   (this will be unique based on the end customer or circuit)

Like to understand mode, there is deep session Cisco Live - BRKSPG-2202