i am trying something inline with title mentioned but i m getting stuck up in getting my vpnclient establish the connectivity with my IPE box which is 7206.
i have tried establishing the dynamic ipsec with my 6513 box configured to accept the same where its working fine w/o any issues but my bad luck i dont have a compatible ios to tune my 6513 box to support vrf aware ipsec and since i hv my 7206 supports the same functionality i didnt want 6513 to cater that feature.
i hve even tried the same config of normal plain dynamic ipsec which i hv tried in 6513 switch but still i m getting into the same problem.
i m getting remote peer is no longer responding in my vpn client.
i m attching the config of my ipe box herewith this msg,pls do suggest how do i proceed to make it thru coz i m gone out of ideas and gone totally dry
(coz trying/cracking this continously for hrs together..) :-(
thx a lot i got it working ,but do revert how come the same is working fine without any issues in my 6513 box without the above mentioned command.thtsy i got stumpeddd :-(
any compatibility issues or any specifics been put to add this syntax in 7206 boxes alone ?coz i m aware of some boxes even in production network running dynamic ipsec stuffs without the above mentioned command..
The only thing I can think of is a difference of behavior in the IOS train used on the 6500. My only experience with IPsec was on the 7200 and I ran into the same issue where the IPsec session wouldn't come up without this command. I could not speak to the behavior on the 6500.
Hope this helps,
Harold Ritter Sr Technical Leader CCIE 4168 (R&S, SP) firstname.lastname@example.org México móvil: +52 1 55 8312 4915 Cisco México Paseo de la Reforma 222 Piso 19 Cuauhtémoc, Juárez Ciudad de México, 06600 México