Network Access Control

Dear Community, Current we are using AnyConnect agent version 4.x with Compliance Module 4.3.17XX We plan to upgrade to new Compliance Module 4.3.33XX though SCCM server. Please kindly provide good practice to achieve this goal with no impact. Apprec...

Dear Community, We are planning to upgrade Cisco Any Connect agent 4.x to Secure Client 5.x We will deploy new Secure Client 5.x through SCCM server ( purpose deploy 300 PCs per time ). We want to ensure no any impact with all PCs are installed Any C...

Can ISE posture detect whether a client laptop/desktop is connected/joined to Azure Entra id (Azure AD). Earlier ISE had an option to identify whether s system is joined to AD. 

The environment is Cisco ISE 3.2 patch 4 and Cisco ASA 9.16.4.  The computer is a Win10 laptop running the latest Cisco Secure Client 5 (AnyConnect).  We have domain controllers hosted in Azure and also Enfra ID in Azure.  I previously setup ISE for ...

i'm currently implementing ISE posture on one of my clients, but i'm facing an issue when the endpoint get a non-compliant status, it automatically goes to a unknown state and start re-scaning The expected behavior is that if and endpoint goes to a n...

Hello all,I have a setup where ISE is to be configured to authenticate users to login on network devices (router/switch etc). We need the ISE to perform dual authentication of the user, means username/password (from AD)  and user certificate (NOT mac...

Hi all,We have recently deployed Cisco ISE for authentication purpose, but over wired connection when we plug the lan cable & apply the policy on the meraki switch port, for some users its working fine but on other devices the endpoint is sending MAC...

Hi everyone, i am looking for a way to posture windows and MAC clients without remediation, i mean, if a posture policy doesn't comply, the client is declared automatically not compliant and the corresponding authorization policy match (in my case, o...